pressure hose
英 [ˈpreʃə həʊz]
美 [ˈpreʃər hoʊz]
网络 耐压软管; 压力软管; 高压软管
双语例句
- Make sure that the pressure hose is routed above the parking brake cable!
确保将压力软管布置到驻车制动拉线上！ - They are mainly used in all kinds of high pressure wire braided rubber hose, fabric hoses, absord hoses, kinds of rubber rollers and rubber fender.
它们主要用于各种高压钢丝编织胶管，纤维胶管，吸管，各种橡胶辊和橡胶护舷。 - And our company also has unique, high-performance six-wires high pressure hose assembly, which can do well in preventing pulling out and leaking oil.
在高压胶管总成防拔脱、防渗漏方面，我司拥有独特的超强性能的六层超高压系列产品。 - This test-bed is mainly used for high and low pressure seal of High-pressure hose.
该试验台主要用于高压胶管的高低压密封。 - Install the new holder and fit the pressure hose at the plug-in coupling.
安装新的保持架并将压力软管装到插入式管接头处。 - The measure of the load to bend the hose with no pressure shall be compliant with the service the hose is intended to.
在无压情况下弯曲软管的负载大小应符合软管预期的应用。 - Polyvinyl chloride low pressure hose for liquefied petroleum gas
液化石油气低压聚氯乙烯（pvc）软管靠降低地层压力采出的油 - Loosen pressure hose on the turbocharger.
松开涡轮增压器上的压力软管。 - The pressure hose must engage with an audible click.
安装压力软管时必须听到软管卡入位的声音。 - This paper introduces the industry actuality of aramid reinforced high pressure hose and compared the performance of aramid with other reinforcing material.
本文介绍了国内外芳纶高压胶管的产业现状，对比了芳纶纤维与其它骨架材料的性能。 - In addition, this paper analyzes and gives reasonable proposes on current localization for aramid reinforced high pressure hose in China.
此外，本文对我国当前芳纶高压胶管的国产化进行了分析，并提出了合理的建议。 - Install pressure pipe with right pressure hose.
安装压力管和右压力软管。 - The utility model has the advantages of novel structure, high strength, small permanent compression deformation, good elasticity and superior flexibility and is a novel plastic high pressure hose.
该管结构新颖、强度高、永久压缩变形小、弹性好，可挠性优良，适用范围广，是一种新型的塑料高压软管。 - To do this, push the pressure hose onto the pressure pipe and tighten the hose clamp.
为此，将压力软管推到压力管上并拧紧软管卡箍。 - Remove pressure gauge with test hose.
拆下压力表和测试软管。 - Production of Electroplating Brass Steel Wire for High Pressure Hose
电镀黄铜高压胶管钢丝生产 - Experimental study of the pressure loss of hoses of hard hose traveler
卷盘式喷灌机软管阻力损失的试验研究 - Design of elastic beam in pressure hose structure of hose reel irrigation
绞盘卷管式喷灌机压管机构中弹性梁的设计 - Research is mainly carried out for the influences on the fire hose's pressure loss, such as: on-way resistance coefficient, roughness, local resistance coefficient, hose pressure, hose diameter, flow and soon.
主要分析沿程阻力损失系数、粗糙度、局部损失系数、水带压力、水带直径和流量对水带压力损失的影响。 - Lorry weigh-in-motion apparatus using pressure hose sensor
油管传感器式汽车行驶称重仪的技术实现 - The hydraulic experiment has proved that the standard circular section of the plastic hose can only be formed in the condition of a certain internal water pressure because the plastic hose is hydraulic smooth pipe, soft and elastic and different from the hard texture plastic pipe.
水力学实验表明，塑料软管是水力光滑管，但与硬质塑料管不同，它柔软而富弹性，只有在一定的内水压强下才能显标准圆形断面。 - Reinforcement fabric knitting machine for plastic pressure hose
塑胶压力软管增强层编织机 - A new reinforcement fabric knitting technology for plastic pressure hose was introduced. Weft knitting technology was adopted in knitting the reinforcing layer and a new type of reinforcing fabric knitting machine for plastic pressure hose was developed.
介绍一种新的塑胶压力软管增强层编织工艺，采用纬编针织的方法编织塑胶压力软管增强层，设计研制了新型塑胶压力软管增强层编织机。 - The necessary data, such as the physical mechanic properties, the hydraulic characteristics, the permissible Working pressure, and the suitable sizes of the hose, etc.
有些方面如物理力学性状、水力性能指标、允许工作压力、以及管材的适宜规格等方面也缺乏资料。 - The knitting equipment and technique can effectively avoid fiber slippage on the reinforced layer, and improve the strength, flexibility and other mechanical properties of the plastic pressure hose.
该编织工艺和编织机能有效防止编织层纤维之间产生的滑移，改善塑胶压力软管的力学性能，提高塑胶压力软管的强度和柔韧性。 - Study on protection of high pressure flexible water hose
高压输水软管防护研究 - The analytical solution has contained the components of the pressure, the gravity, the friction and the momentum, and reflected the various factors on the distribution of pressure along the porous hose.
解析解由压力项、重力项、摩阻项和动量项组成，反映了各种因素对多孔管压力分布的影响。 - If the pipeline layout, plumbing materials, the diameter of pipeline and the work pressure head of the hose fixed, the total flow of discharging along the porous hose can be got by corresponding flow multiplied by a flux reduction coefficient of free flow without porous hose.
如果管道布置、管道材料、管道直径和作用水头一定，则沿程多孔泄流管道的总出流量可以用不接多孔软管所对应的自由出流管道的出流量乘一个流量折减系数得到。